Bedec Acrylic Floor Paint
Battleship Grey
colours
size
£41.95
1
colours
size
£41.95
1
2-3
coats
coats
Up to
10 m2/L
10 m2/L
Dry in
4 hrs
4 hrs
An ultra tough, hard wearing acrylic floor paint for all interior wooden and concrete floors. Water-based and quick-drying.
Features
- Protects and enhances domestic and some industrial wood and concrete floors
- Perfect for zone marking or decoration
- Slip resistant, satin finish
Overview
Bedec Acrylic Floor Paint is a tough and durable self-crosslinking acrylic coating for all types of interior wooden and concrete floor. Perfect for cement rendering, stone, chipboard, all types of wood and most types of plastic, too. Contains a fine aggregate to give anti-slip properties.
- Need a finish for interior walls, doors and skirting boards instead? See Bedec MSP (Multi Surface Paint)
- Require a finish for exterior outbuildings, cladding and other exterior joinery? See Bedec Barn Paint Matt, Bedec Barn Paint Satin and Bedec Barn Paint Semi-Gloss
Do not use where prolonged contact with wet or soft compound vehicle tyres can occur.
Preparation
For the best results, ensure that surfaces painted are clean, dry and free of dirt, dust and grease.
- Remove all loose and defective coatings
- Remove all mould and algal growth with a suitable fungicidal wash
- Lightly sand previous paint finishes for a key
- Smooth, glossy surfaces, such as plastics should be abraded for adhesion
- Sand all bare wood, including smooth, planed new wood
- Knotting solutions should be avoided
- Ensure any laitance is cleaned and removed before painting with Bedec Floor Paint
- Abrade and scarify power floated floors to improve adhesion
- Allow new concrete to dry and cure for around a month before painting
Application
Always try a test area before starting any project to assess compatibility of the final finish. Always follow the manufacturer's instructions on the tin. Ensure good ventilation during the drying phase.
- Stir thoroughly before and during use, making sure to reach the pigment in the top and bottom creases of the tin
- On new wood, cement or any porous substrate, the first coat should be thinned with up to 30% clean water
- Apply with a brush or microfibre roller, being careful not to overspread
- High traffic areas should receive 3 coats and other, lower traffic areas only require 2
- Allow 4 hours to dry between coats and full traffic can be resumed 24 hours after the final coat of Bedec Acrylic Floor Paint
Technical specification
Suitable for
Lounge, Bathroom, Kitchen, Dining Room, Hallway, Bedroom, Nursery Office, Garage,
Drying time:
4 hours
Location:
Interior
MPN:
BEDE2FFR001/40
GTIN:
5055006798616