Crown Trade Wood Primer
- 1L
- 2.5L
- 5L
£16.99 - £51.99
1
- 1L
- 2.5L
- 5L
£16.99 - £51.99
1
A solvent-based primer offering excellent opacity and adhesion. Ideal for both interior and exterior use
Features
- For interior and exterior use
- Can be used on a variety of timbers and boards
- Seals the surface to provide excellent adhesion
- Provides a sound foundation for painting
- Excellent opacity
- Solvent-based
- Coverage: 12 m2
- Coats: 1
- Drying time: 16 hours
Overview
Overview
Crown Trade Wood Primer is a premium quality solvent based primer for priming interior and exterior softwood, plywood, chipboard and flakeboard.
Preparation
Preparation
To achieve the best results it is important that all surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied
New Timber
- Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius
- Remove all dust
- Timber with oils/extractives must be swabbed clean with clean methylated spirits
- Treat any knots with two coats of fresh knotting
- Fill any fixing holes, open joints and shallow surface defects with an appropriate wood filler
Previously Decorated Surfaces
- Remove all loose, failing or suspect paint
- Remove grey and denatured surfaces by rubbing down with abrasive paper
- Feather edges of sound paint, remove all dust
- Organic growth must be treated and removed
- Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin
- Treat knots with two thin costs of a fresh knotting
- Fill and fixing holes, cracks and shallow surface defects with an appropriate wood filler
- Wash remaining sound paint with hot water and liquid detergent solutions to remove any contaminants
- Wet abrade to provide a key, rinse with clean water to remove any residues, allow to spot dry
- Spot prime bare and filled areas with one coat of Crown Trade Wood Primer
Application
Application
Always make a test area before the application to judge the suitability of the product. Follow the manufacturer's instructions at all times.
Do not apply if the air or substrate temperatures are likely to be below 8°C or to exceed 80% humidity. The moisture content of the substrate should not exceed 18%.
- Stir well before and during use
- Application can be performed with either a high quality short or medium pile roller or a good quality synthetic or bristle brush
- Maintain a wet edge
- Lay off in the direction of the grain
Technical Specification
Technical Specification
Brand:
Coverage:
12 m2
Coats:
1
Location:
Interior
Location:
Exterior
Drying time:
16 hours
Sizes:
1L2.5L5L
Datasheets:
Suitable for:
LoungeBathroomKitchenDining RoomHallwayBedroomNurseryOfficeGarageGardenConservatoryPorchClassroomGames roomLoftCellarPlayroom
MPN:
Please select size/option
GTIN:
Please select size/option