Dulux Easycare Bathroom Soft Sheen
- Almond White
- Blush Pink
- Chic Shadow
- Coastal Grey
- Denim Drift
- Egyptian Cotton
- First Dawn
- Frosted Steel
- Goose Down
- Heart Wood
- Ivory Lace
- Jade White
- Jasmine White
- Magnolia
- Marine Splash
- Mellow Mocha
- Mineral Mist
- Misty Mirror
- Mossy Stone
- Natural Calico
- Natural Hessian
- Natural Wicker
- Nutmeg White
- Polished Pebble
- Pure Brilliant White
- Rock Salt
- Soft Stone
- Summer Linen
- Teal Touch
- Timeless
- Warm Pewter
- Willow Tree
- 30ml Sample
- 1L
- 2.5L
- Almond White
- Blush Pink
- Chic Shadow
- Coastal Grey
- Denim Drift
- Egyptian Cotton
- First Dawn
- Frosted Steel
- Goose Down
- Heart Wood
- Ivory Lace
- Jade White
- Jasmine White
- Magnolia
- Marine Splash
- Mellow Mocha
- Mineral Mist
- Misty Mirror
- Mossy Stone
- Natural Calico
- Natural Hessian
- Natural Wicker
- Nutmeg White
- Polished Pebble
- Pure Brilliant White
- Rock Salt
- Soft Stone
- Summer Linen
- Teal Touch
- Timeless
- Warm Pewter
- Willow Tree
- 30ml Sample
- 1L
- 2.5L
- A water-based emulsion for bathroom walls and ceilings
- Offers excellent resistance to steam and moisture
- 5 year mould protection guarantee
- Dries to a soft-sheen finish
- Drying time: 24 hours
- Coverage: 13 m2
- Coats: 2
- Drying time: 6 hours
Dulux Easycare Bathroom Soft Sheen is a water-based emulsion designed for bathroom walls and ceilings, providing excellent steam and moisture resistance. It guarantees a '5 year' protection against mould, using Mouldtec formulation. Available in a wide range of attractive Dulux paint colours.
- For a general purpose scrubbable emulsion for use all around the home, take a look at Dulux Easycare Washable and Tough Matt
- Need a grease-resistant paint for kitchen walls and ceilings instead? Try Dulux Easycare Kitchen Matt
For best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas.
- Remove all loose and defective paint with a paint scraper, by sanding, or with a paint stripper
- Remove any pre-existing mould and fungi using an appropriate mould and mildew cleaner and use a stain block primer
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
- Where necessary, wash the surface to remove dirt, grease and dusty residues, rinse with clean water and allow to dry
- Any surface defects should be filled with an appropriate filler
- If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
- Seal all surfaces that remain powdery after thorough preparation with an appropriate plaster sealer
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Use only in well ventilated areas. Keep any aquariums and plants away from the environment where the product is being applied.
For best colour consistency, purchase sufficient paint for each project including enough for touch-in at a later time.
- Stir the paint thoroughly before and periodically during use
- Apply 2 coats of Dulux Easycare Bathroom Soft Sheen using a good quality synthetic brush or microfibre roller
- Allow 6 hours drying time between coats
- Allow 24 hours to fully dry before subjecting surfaces to steam and moisture
- For significant colour change, further coats may be required
To maintain the finish, simply apply a fresh coat of Dulux Easycare Bathroom Soft Sheen paint, following the Preparation and Application instructions above.
Please note: For Health & Safety reasons spray application is not recommended when using fungicidal paints.