Dulux Trade Diamond Satinwood
- 1L
- 2.5L
- 5L
- 1L
- 2.5L
- 5L
- A water-based, tough satin paint for interior wood and metal
- Perfect for doors, windows, trim, radiators and more
- Extra protection for the busy areas in the home
- Quick drying and low odour formulation
- Drying time: 6 hours
- Coverage: 12 m2
- Coats: 2
Dulux Trade Diamond Satinwood is a water-based, non-yellowing satin finish for interior wood and metal. It has been designed with the high-traffic areas of your home in mind, with extra protection from scratches, stains and grease.
A professional finish with non-yellowing technology: if you're thinking of making the switch to water-based, this should be the option to consider!
- For an eggshell finish instead, see Dulux Trade Diamond Eggshell
To get the best application by brush with all water-based satinwood paints, lightly dampen both a synthetic brush and the surface before application to increase flow out and coverage.
To get the best out of Diamond Satinwood, ensure that surfaces painted are clean, dry and free of dirt, dust and grease.
- Remove any flaking or defective paint with a paint scraper or wire brush. Rub down sound coating with P120 sandpaper for a key on the surface to aid adhesion and remove any dust with a slightly damp lint-free cloth
- Special precautions should be taken during surface preparation of pre-1960s painted surfaces as they may contain harmful lead
- Fill any gaps or splits in the timber with a dedicated wood filler
- On bare wood, use suitable knotting solution on any knotty, resinous timber
- When overcoating a factory primed substrate, or a stronger colour change is required, prime with Dulux Trade Quick Drying Undercoat and allow to dry before application
Always try a test area before starting any project to assess compatibility of the final finish. Follow the manufacturer's instructions on the tin at all times.
- Stir thoroughly before and during use, making sure to reach the pigment in the top and bottom creases of the tin
- Apply Dulux Diamond Trade Satinwood using a high-quality synthetic bristle paint brush, spray or microfiber roller, following the direction of the wood grain
- Allow 6 hours to dry between coats
- Apply 2 full flowing coats, with additional coats if required
Painted surfaces can be wiped down with a damp lint-free cloth to remove surface scuffs and marks.
When it's time for a refresh, apply a fresh coat of Dulux Trade Diamond Satinwood using the Preparation and Application steps above.