Hammerite Direct to Rust Metal Paint Satin Finish
Colour
size
£10.27 - £44.24
1
Colour
size
£10.27 - £44.24
1
2
coats
coats
Up to
5 m2/L
5 m2/L
Dry in
4 hrs
4 hrs
A corrosion resistant satin paint for exterior ferrous and non-ferrous metal. No primer necessary for most projects.
Features
- A solvent-based, decorative satin paint for exterior metal
- Apply direct to rusted areas, no primer needed
- Manufacturer provided 8 year protection
Overview
Hammerite Direct to Rust Metal Paint Satin Finish is perfect for all kinds of metal projects such as railings, metal pipework, decorative pots and much more. Apply to previously corroded metal, no primer necessary. Finishes to a subtle, contemporary satin finish.
- Also available in a smooth, glossy finish: Hammerite Direct to Rust Metal Paint Smooth
Preparation
For the best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants.
- Remove all loose rust and flaking material with a wire brush
- Wash area down with a mild mixture of detergent and warm water, rinse with clean water and allow to dry thoroughly
- Try a small test patch directly onto the area to treated and leave for an hour before assessing
- If there is no reaction, move forward with Hammerite Direct to Rust Metal Paint on the whole project
- If there is a reaction, remove all paint and clean down with thinner and treat as below
- On bare zinc, aluminium, reactive surfaces and galvanised metal, apply a specialist primer before application of Hammerite Paint
Application
Always do a test area before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas.
- Stir Hammerite Direct to Rust Metal Paint Satin Finish thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- When applying to previously painted metal in good condition, 1 coat should be sufficient
- If applying to bare or rusty metal, a second coat will be required, allow 4 hours to dry before re-coating
- Ensure all edges and corners are sufficiently covered, being careful not to over-apply
- After painting is complete, clean brushes out with Hammerite Brush Cleaner and Thinners
Technical specification
Suitable for
Garage,
Drying time:
4 hours
Location:
Exterior
MPN:
Please select size/option
GTIN:
Please select size/option