Hammerite Direct to Rust Metal Paint Smooth Finish
- Black
- Blue
- Copper
- Cream
- Dark Green
- Gold
- Muted Clay
- Red
- Silver
- White
- Wild Thyme
- Yellow
- 250ml
- 750ml
- 2.5L
- 5L
£10.27 - £74.10
1
- Black
- Blue
- Copper
- Cream
- Dark Green
- Gold
- Muted Clay
- Red
- Silver
- White
- Wild Thyme
- Yellow
- 250ml
- 750ml
- 2.5L
- 5L
£10.27 - £74.10
1
A solvent-based corrosion resistant paint for ferrous and non-ferrous metals. A smooth gloss finish for maximum protection.
Features
- A solvent-based, decorative paint for exterior metal
- Apply direct to rusted areas- no primer needed
- Manufacturer provided 8 year protection
- Smooth glossy finish
- Drying time: 4 hours
- Coverage: 5 m2
- Coats: 2
Overview
Overview
Hammerite Direct to Rust Metal Paint Smooth Finish is perfect for all kinds of metal projects such as railings, gates, garden furniture, metal pipework, decorative pots and much more. Apply to previously corroded metal, no primer required. Finishes to a smooth gloss finish.
- Also available in a smooth, satin finish: Hammerite Direct to Rust Metal Paint Satin Finish
Preparation
Preparation
For the best results with Hammerite Paint, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants.
- Remove all loose rust and flaking material with a wire brush
- Wash area down with a mild mixture of detergent and warm water, rinse with clean water and allow to dry thoroughly
- Try a small test patch directly onto the area to treated and leave for an hour before assessing
- If there is no reaction: move forward with Hammerite Direct to Rust Metal Paint Smooth on the whole project
- If there is a reaction: remove all paint and clean down with thinner
- On bare zinc, aluminium and galvanised surfaces, apply a specialist primer before application of Hammerite Direct to Rust Metal Paint Smooth
Application
Application
Always do a test area before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas.
- Stir thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- When applying to previously painted metal in good condition, 1 coat of should be sufficient
- If applying to bare or rusty metal, a second coat will be required, allow 4 hours to dry before re-coating
- Ensure all edges and corners are sufficiently covered, being careful not to over-apply
- After painting with Hammerite Direct to Rust Metal Paint Smooth Finish is complete, clean brushes out with Hammerite Brush Cleaner and Thinners
Technical Specification
Technical Specification
Brand:
Drying time:
4 hours
Coverage:
5 m2
Coats:
2
Location:
Exterior
Location:
Interior
Sizes:
250ml750ml2.5L5L
Datasheets:
Suitable for:
GarageLoungeKitchenDining RoomHallwayBedroomOfficeGardenConservatoryPorchClassroomGames roomLoftCellarPlayroom
MPN:
Please select size/option
GTIN:
Please select size/option