Protek Royal Metallics
- Bronze
- Copper
- Gold
- Silver
- 125ml
- 1L
- 2.5L
- Bronze
- Copper
- Gold
- Silver
- 125ml
- 1L
- 2.5L
- A long-lasting, protective paint for interior and exterior wood
- Low-odour, water-based formula
- Perfect for all types of wood
- Drying time: 2 hours
- Coverage: 8 m2
- Coats: 2-3
- Drying time: 4 hours
Protek Royal Metallics is a joinery grade, water-based paint for all wooden projects- from joinery to cladding, furniture to ornamental trim. It can also be applied to suitably primed plastic and metal. A bright and shimmery finish to add a little flair to a statement piece.
Also available from the Protek Royal range:
Ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants. Clean with a mild detergent and warm water, rinse and allow to dry where necessary.
- For best results, previous finishes including paints and varnish should be completely removed
- Treat any knotty timber with either a knotting solution or stain blocking primer
- Treat areas affected by mould and organic growth with a suitable mould and mildew cleaner
- Treat bare, exterior wood with a suitable wood preservative prior to application of Protek Royal Metallic Wood Finish
Always do a test area before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Do not apply if inclement weather is expected within 48 hours. Do not apply to wet, damp or frozen timber.
- Stir thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- Apply 2 coats with a high-quality synthetic bristle brush, microfibre roller or low-pressure spray, allowing 2 hours between coats
- Further coats may be required for projects that require a stronger colour change, further coats will also improve the colour, lustre and sheen level
When it's time for a refresh, simply apply a coat of Protek Royal Metallics following the preparation and application steps above.