Sandtex Microseal Ultra Smooth Masonry Paint
coats
14 m2/L
3 hrs
- A water-based, breathable masonry paint
- Dirt resistant finish resists flaking
- 15 years trusted durability
- Rainproof in just 1 hour
Sandtex Ultra Smooth Masonry Paint is a microporous, dirt resistant finish for most types of masonry including render, roughcast, pebbledash, concrete, building blocks, facing bricks and previously painted surfaces. With 15 years trusted durability, you can ensure that your home will look fresher for longer.
With the added benefit of being rainproof in just 1 hour, the job can be completed even if the weather forecast is not reliable.
This product was previously called Sandtex Ultra Smooth Masonry Paint. The formula remains the same.
Please note, this product is not suitable for use on common, fletton or engineering type bricks.
- Need a slightly textured finish instead? See Sandtex Microseal Textured Masonry Paint
For the best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, grease or any other surface contaminants.
- New or fresh surfaces normally require very little preparation but they must be completely dried out before they are decorated
- Treat any mould or algal growth with a suitable mould and mildew cleaner, such as Sandtex Fungicidal Wash before brushing down to reduce spreading spores. Re-apply this treatment after brushing if necessary
- Remove any loose and flaking material by scraping away or brushing down with a stiff bristle brush, not a wire brush
- For the perfect, ultra smooth finish fill any minor holes, cracks and general surface imperfections with Sandtex Ready Mixed Masonry Filler
- Chalky, powdery, heavily weathered or very porous surfaces should be treated with Sandtex Quick Drying Stabilising Solution
Always do a test area before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas. Do not apply if there is a chance of rain or frost during the drying process.
- Stir thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- Apply Sandtex Ultra Smooth Masonry Paint with a roller or masonry brush
- 2 coats are normally sufficient but further coats may be required for projects with a stronger colour change
- Allow 3-4 hours between coats to dry