Dulux Matt Paint
coats
14 m2/L
4 hrs
- A tough, durable matt finish emulsion for interior use
- Suitable for walls and ceilings around the home
- Available in a wide range of attractive colours
- Can be applied with a brush, roller or spray
For the best colour consistency, purchase sufficient paint for each project including enough for touching-in later. This will eliminate the subtle differences between batches of paint.
Dulux Walls and Ceilings Matt Paint is a water-based emulsion that has been specially designed for interior walls and ceilings. It is available in a large palette of attractive, contemporary colours and dries to a durable, matt finish.
- For the best accent to your project, use in conjunction with Dulux Quick Dry Eggshell, Dulux Quick Dry Satinwood and Dulux Quick Dry Gloss.
- Also available for making a dark room look bigger and brighter, Dulux Light and Space Matt Paint.
For the best results out of Dulux Matt paint, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas.
- Remove all loose and defective paint with a paint scraper, by sanding, or with a paint stripper.
- Remove any pre-existing mould and fungi using an appropriate mould and mildew cleaner
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
- Where necessary, wash the surface to remove dirt, grease and dusty residues, rinse with clean water and allow to dry
- Any surface defects should be filled with an appropriate filler
- If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
- Seal all surfaces that remain powdery after thorough preparation with an appropriate plaster sealer
Always do a test area of Dulux Matt Paint before starting any project to assess product suitability. Follow the manufacturer's instructions on the tin at all times. Use only in well-ventilated areas.
- Stir thoroughly before and during use, making sure to include pigment gathered in the top and bottom creases of the tin
- Apply 2 even coats of Dulux Walls and Ceilings Paint using a high-quality synthetic bristle brush, microfibre roller or airless paint sprayer
- Allow 2-4 hours between coats
- For a significant colour change, an extra coat may be required
When the finish is looking tired and in need of a refresh, apply a fresh coat of Dulux Walls and Ceilings Matt Paint using the Preparation and Application steps above.