Dulux Trade Sterishield Diamond Eggshell
- A high quality, water-based eggshell paint for interior walls and ceilings
- In-film bactericide inhibits bacteria and reduces MRSA and E.coli
- Perfect for high-use, hygienic areas that need regular cleaning
- Four times more durable than equivalent matt emulsion
- Drying time: 6 hours
- Coverage: 16 m2
- Coats: 2
- Drying time: 120-240 mins
Dulux Trade Sterishield Diamond Eggshell is a tough, washable mid-sheen emulsion, containing an in-film bactericide, which inhibits bacteria and reduces populations of MRSA and E. coli. When combined with appropriate cleaning practices, it helps promote a hygienic environment. Perfect for use with approved NHS cleaning programmes, so suitable for hospitals, food and preparation areas, nursing homes and many more.
Please Note: This product is not suitable for immersed surfaces or where there is very heavy and prolonged condensation.
- For an antibacterial matt emulsion instead, use Dulux Trade Sterishield Diamond Matt Emulsion
Ensure that surfaces painted with Dulux Trade Diamond Eggshell Paint are clean, dry and free of dirt, dust and waxes and grease.
- Remove all loose and defective paint. Special precautions should be taken during preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Where necessary, wash the surface to remove dirt, grease and powdery residues. Rinse with water and allow to dry thoroughly.
- Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer.
- Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
- Any surface defects should be filled with an appropriate filler
- Seal all powdery or heavily stained surfaces with Dulux Trade Stain Block Primer
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
- Stir the paint thoroughly before and periodically during use, making sure to include pigment gathered in the top and bottom creases of the tin
- Apply 2 coats with a high quality synthetic brush, microfibre roller, conventional spray or airless spray system
- Seal new or bare surfaces with a thinned first coat of Sterishield Eggshell, up to 1 part clean water to 10 parts paint
- The normal finishing process is 2 full coats, for significant colour change, further coats may be required
- Allow 2-4 hours between coats and 6 hours to fully dry
Painted surfaces can be gently wiped down with a damp lint-free cloth to remove surface scuffs and marks.
When it's time for a refresh, simply apply a fresh coat of Dulux Trade Sterishield Diamond Eggshell as required, following the Preparation and Application instructions above.