Ronseal Quick Drying Stain Block Aerosol
- Stain blocking primer basecoat for interior walls and ceilings
- Handy spray application for the hard-to-reach areas
- Stops stains from bleeding through finished paint
- Protects against nicotine, crayon and more
- Drying time: 10 mins
- Coats: 2
- Drying time: 24 hours
Ronseal Quick Drying Stain Block Aerosol is a stain blocking primer basecoat for interior walls and ceilings, to be applied directly before application of an emulsion topcoat. Stops stains bleeding through the freshly painted surface. With protection from nicotine stains, old water stains, grease, crayon, wine and more.
Please note: this product is not for application on wood or metal.
- Also available for larger areas: Ronseal One Coat Stain Block
For the best results, ensure surfaces to be painted are sound, clean, dry and free from dirt, dust or any other surface contaminants.
Make sure the source of the stain has been dealt with prior to application, as this product cannot be used on stains that are still damp.
- Remove any mould or organic growth with Ronseal 3-in-1 Mould Killer
- Repair any cracks or surface imperfections with a suitable filler, such as Ronseal High Performance Wood Filler
- Rub down area to be painted to a smooth, even finish
Always do a test area of Ronseal Quick Drying Stain Block Aerosol before starting any project to assess product suitability. Always follow the manufacturer's instructions on the tin. Use only in well-ventilated areas.
- Shake the can until it starts rattling, then continue for a further minute
- Hold the can around 20cm away from the surface and spray in a long, sweeping motion
- Hold the can upside down and spray out any residual paint in the nozzle for 2-3 seconds and wipe clean with a damp cloth
- Allow to dry for 10 mins
- Apply the second coat, repeating the instructions above
- Allow 24 hours to dry before application of a suitable topcoat