Zinsser Write-On Paint
coat
12 m2/L
4 hrs
- Ultra tough two-component paint which transforms walls into a dry wipe surface
- Perfect for use in schools, offices and commercial areas
- Paint approximately 30sqM with this pack
- Simple application onto painted surfaces
With Zinsser Write-On Paint, you can turn almost any painted surface into a creative space fit for presentation, learning, drawing, grocery lists and much more. Perfect for use with most dry-wipe marker pens*.
Pack Contains:
- Zinsser Write On Paint Base, part A (2L)
- Zinsser Write On Paint Activator, part B (500ml)
- Large Microfibre Roller
*Whilst most dry wipe markers are suitable, it's always worth checking the suitability of pens with this surface with a test area before large areas are drawn on.
For the best results, Zinsser Write On Paint should be applied to previously painted walls, plasterboard, hardboard, wood, cement and metal. Best coverage is achieved on lighter coloured emulsions, vinyl silk or water-based acrylic eggshell. Do not apply to vinyl matt or other weakly bound surfaces such as chalk paint.
New, unpainted surfaces or previously painted surfaces with a dark colour should be primed with a water-based primer first, such as Zinsser Bulls Eye 1-2-3.
Always try a test area where possible before starting any project to assess compatibility of the final finish. Follow the manufacturer's instructions on the tin at all times for the best results from Zinsser Write-On Paint.
- In a separate container or paint kettle, pour approximately half of part B (activator) into approximately half of part A (paint) and stir thoroughly for around 2 mins and a uniform colour should be achieved
- The mixed paint and activator will have a pot life around 3-4 hours depending on weather conditions, do not use this mixture after this point
- Use the enclosed microfibre roller to apply, using a brush to cut in if necessary
- Finished coating will be touch dry in around 4 hours but allow a full 5 day cure before first use
If ghosting of the dry wipe marker occurs, clean the surface with white board cleaning solution and leave the surface to dry for 24 hours before usage is resumed